FIGURE "8" MARS LIGHTS FOR SALE.
Each light has an L.E.D. that puts out over 50 lumens of light
and is good for 100,000 hours, as stated by the manufacturer of the light.
Just wire it into your 12VDC system, mount it to your locomotive and go!!!
$300.00 each with free shipping in the Continental USA only.

Gordon Briggs
Timber Creek Railroad
contact me at:
phone:(530)273-9145
e-mail: timbercreekrr@yahoo.com
web: http://www.timbercreekrr.zoomshare.com/

See video of MARS light running.

5/7/2008

FOR SALE:

1.5” scale Pyle National extended case dual GYRALITE.
This is modeled and operates “True to scale” from the prototype and is constructed primarily of brass. It is often seen mounted on the front of high hood GP and SD series road engines and SW series switch engines. The only part extending through the hood of your loco would be its 2.5vdc power cable. “Extended case GYRALITE”. Price $395.00 allow up to 5 weeks delivery.

See video.

FOR SALE:

1.5" scale Pyle National flush mount dual GYRALITE.
Available with or without light shields.

This is modeled and operates “True to scale” from the prototype and is constructed primarily of brass. It is often seen mounted center over the front cab window. The light operates on 2.5vdc.
“Flush mount GYRALITE”. Price $395.00 allow up to 5 weeks delivery.

See video.

FOR SALE:

12vdc to 2.5vdc voltage regulator/reducer for GYRALITES. $30.00

Contact:
Keith Jackman
636 Linden Ave.
Grass Valley, CA 95945
Ph: (530)272-8531
kpjackman@sbcglobal.net

FOR SALE:

5 ton hydraulic car lift, great for use as train lift/turntable

Gil Beaird 530-823-8142

9/1/2007

FOR SALE - 7 1/2" gauge 4+4 Beam Engine and tender with two 7 1/2 foot bench type riding cars equipped with Tom Bee trucks and couplers. Pneumatic brakes on all cars. Current SVLSRM boiler certificate on a 12" diameter vertical steel boiler, propane fired, with 306 3/8" diameter copper fire tubes. Twin cylinder double acting engine with Stephenson valve gear and a bore and stroke of 2"x2.75" driving 4.375" diameter wheels through a 20% overdrive. Drive chains are tight at all times. There is a constant speed universal joint in the center of each truck to allow movement while keeping the drive chains tight. The engine weighs about 400 pounds with eight driving wheels arranged in two four wheel trucks. I haven't found a track or turn I couldn't handle. The suspension is very flexible, rock solid on the rails and the engine has a working headlight.

The train is set-up on a new two wheel trailer for towing with a car or small pick-up truck. I estimate the weight of the complete train and trailer at about 1000 pounds. This engine is a runner, fast, with exceptional pulling power and is very easy to run, very forgiving. You can check and adjust either firing or water level in about two seconds. Because of having a vertical boiler the engine does not require any additional inputs to fire up, just open the valve on the propane tank and light the burner after you fill the boiler and water tank with water. The train and trailer are located in Reno, Nevada

Asking $10,000.

Contact Bill Cody at (775) 674-6512 or steamboatbill@sbcglobal.net for additional information/pictures.

3/23/2007
updated 3/7/2008

Switch stands, point throw mechanism and point plate for attaching the points is included with the switch stand. A complete set-up for $85.00 plus shipping They may be viewed on my website under photos in the for sale album: http://www.timbercreekrr.zoomshare.com/ Contact me by phone or e-mail for questions and quantity discounts. Gordon Briggs timbercreekrr@yahoo.com phone: (530)273-9145

re posted 1/15/2007 upd 11/24/07

1" scale 60 Ton electric steeple cab. electric, two four wheel trucks with a motor on each axle. It as bell, horn and lights. $ 3,250 Please contact Ray Reiff 559-738-8447